Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi Global Band

Description: This auction is for SIM7070G Cat-MNB-IoTGPRS HAT (EN) Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. SIM7070G NB-IoT / Cat-M / GPRS HAT for Raspberry Pi, global band support, with GNSS positioning NB-IoT / Cat-M / GPRS / GNSS HAT Low power narrow band cellular IoT communication module for Raspberry Pi Based on SIM7070G, Global Band Support This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on. Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support. Features at a glance Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo) Onboard USB interface, to test AT Commands, get GPS positioning data, and so on Breakout UART control pins, to connect with host boards like Arduino/STM32 SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available) 2x LED indicators, easy to monitor the working status Baudrate: 300~3686400 bps Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications NB-IoT/Cat-M/2G Band NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 GSM/GPRS/EDGE: 850/900/1800/1900MHz Data rate NB-IoT: 136Kbps(DL)/150Kbps(UL) Cat-M: 589Kbps(DL)/1119Kbps(UL) GPRS: 85.6Kbps(DL)/85.6Kbps(UL) EDGE: 236.8Kbps(DL)/236.8Kbps(UL) SIM card support NB-IoT/Cat-M/2G card (1.8V SIM card ONLY) Applicable region global GNSS Receiver type 16-channel C/A Code Band GPS L1: 1575.42 ± 1.023MHz GLONASS L1: 1598.0625 ~ 1605.375MHz BDS B1: 1559.052 ~ 1591.788MHz Galileo L1: 1575.42 ± 1.023MHz Data format NMEA-0183 Antenna Active antenna Other Power supply 5V Operating voltage 5V / 3.3V (configured via 0Ω resistor) Current consumption about 41mA (idle mode) Operating temperature -40°C ~ 85°C Storage temperature -45°C ~ 90°C Dimensions 30.50mm × 65.00mm Standard Raspberry Pi 40PIN GPIO Compatible with Raspberry Pi series boards Global band support of NB-IoT/Cat-M/2G NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 GSM/GPRS/EDGE: 850/900/1800/1900MHz Cloud Communication Supports communication protocols including TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT GNSS positioning Supports GPS, BeiDou, GLONASS, Galileo positioning What's on board SIM7070G MP1482 power chip RT9193-33 power chip Raspberry Pi GPIO header for connecting with Raspberry Pi USB interface for testing AT Commands, getting GPS positioning data, etc. SIM7070G control interface for connecting with host boards like Arduino/STM32 SIM card slot supports 1.8V SIM card ONLY GNSS antenna connector LTE antenna connector Module power key Network status indicator Power indicator Operating voltage selection A: set IO level as 5V B: set IO level as 3.3V (default) DTR selection A: DTR is connected to P26 B: DTR is disconnected (default) PWR selection A: PWR is connected to P4 (default) B: PWR is connected to power supply Pinout definition Outline Dimensions Resources & Services WIKI: www.waveshare.com/wiki/SIM7070G_Cat-M/NB-IoT/GPRS_HAT * Resources for different product may vary, please check the wiki page to confirm the actually provided resources. Selection Guide Cat-M & NB-IoT & GSMCat-M & NB-IoTNB-IoT SIM7000CSIM7000ESIM7070GSIM7080GSIM7020CSIM7020E Applicable regions China Europe / Africa / Australia / Southeast Asia Global China Europe / Africa / Australia / Southeast Asia Band NB-IoT LTE-FDD: B1/B3/B5/B8 LTE-FDD: B3/B8/B20/B28 B1/B2/B3/B4/B5/B8/B12/B13/B18/B19 /B20/B25/B26/B28/B66/B71/B85 LTE-FDD: B1/B3/B5/B8 LTE-FDD: B1/B3/B5/B8/B20/B28 Cat-M B1/B2/B3/B4/B5/B8/B12/B13/B14/B18 /B19/B20/B25/B26/B27/B28/B66/B85 N/A GSM GPRS/EDGE 900/1800 MHz GSM/GPRS/EDGE 850/900/1800/1900MHz N/A N/A GNSS GPS, GLONASS, BeiDou, Galileo N/A Data Rate NB-IoT(Kbps) 34(DL)/66(UL) 136(DL)/150(UL) 136(DL)/150(UL) 26.15(DL)/62.5(UL) Cat-M(Kbps) 300(DL)/375(UL) 589(DL)/1119(UL) 589(DL)/1119(UL) EDGE(Kbps) 236.8(DL)/236.8(UL) 236.8(DL)/236.8(UL) GPRS(Kbps) 85.6(DL)/85.6(UL) 85.6(DL)/85.6(UL) Software Features Network protocol TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT, etc. Firmware upgrade USB UART Hardware Interfaces SIM card slot 1.8V/3.3V 1.8V 1.8V 1.8V/3.3V UART Supports AT commands Supports AT commands, firmware upgrading USB Supports AT commands testing, GPS positioning, firmware upgrading, etc. For external power supply ONLY Antenna connector LTE antenna (SMA) + GNSS antenna (IPEX) LTE antenna (IPEX) + GNSS antenna (IPEX) LTE antenna (SMA) Applications Examples Meters, remote control, smart home, smart city, intelligent agriculture, and so on Package Contains SIM7070G Cat-M/NB-IoT/GPRS HAT x1 LTE Antenna x1 GPS External Antenna (B) x1 USB-A to Micro-B cable x1 Standoffs pack x1 1 2 3 4 5

Price: 35.25 USD

Location: 深圳

End Time: 2024-09-27T10:13:23.000Z

Shipping Cost: 0 USD