Through The Roof! Brush Grade Clear

Description: AWarehouseFull Store Home New Arrivals Ending Soon Add to Favorites Feedback Contact Us Through The Roof! Brush Grade Clear - Pack of 1 PRODUCT DESCRIPTION Description: Sashco Through The Roof Sealant is a premium-quality sealant engineered to provide superior performance and durability, making it the go-to choice for both DIY enthusiasts and professionals. Features & Benefits: Sticks to wet surfaces Excellent UV Resistance Clear version is 19 times clearer than silicone Gunnable down to 32ͦ F Stick to difficult surfaces Super Elastic – 600% maximum stretch Strong tear resistance Exclusive stop flow feature Freeze-thaw stable in package Water repellent Full 10.5oz in every cartridge Does not support mold and mildew growth Paintable Repairs active leaks Lasts 20x longer than asphalt roof cement Perfect for difficult to find leaks and large coverage Clear version makes an invisible repair, doesn’t crack, craze, or yellow Keep the job going even in cold weather Use on all steep-slope roof materials and fixtures Hangs tough with roof movement Lasts long in the roof environment Less waste, less mess Long 3-year shelf life Sheds water the instant you apply it Unlike silicone, paint sticks with no flaking Technical Data: Property Results Test Method Hardness, Shore A Cartridge grade - 35; Brush grade - 33 (21-day cure) ASTM C661 Slump Cartridge grade - <1/8”; Brush grade - slumps ASTM D2202 Solids Cartridge grade: 57.8% by weight Brush grade: 36.0% by weight Brush grade lower VOC: 45.4% by weight Cartridge grade lower VOC: 53.1% by weight ASTM C1250 Extrusion Rate Cartridge grade - 80 g/min (1/8” orifice at 40 psi) Brush grade - N/A ASTM C603 Cured 1 week (dependent on temperature, humidity and bead size/thickness) ASTM C679 Tack-free 30 minutes ASTM C679 Low Temp. Flexibility Pass ASTM C734 Freeze-Thaw Stability Won’t freeze ASTM C731 Adhesion-in-peel Aluminum • Brass • Steel • Copper • Silver ASTM C794 Recommended Applications: Around common roofing fixtures Galvanized metal and aluminum flashing PVC and ABS vent pipe, skylights, gutters, downspouts, ductwork and vents Chimneys, brick, block and mortar Glue down shingles and front edges of flat roof tiles (cedar shake, asphalt, cement, slate and glazed tile) Metal RV roofs Roof jacks, cables and air conditioning units Application Details: Large beads applied in hot weather (above 95ºF) may exhibit slight bubbling. For best results, apply out of direct sunlight. Surfaces must be clean and free of frost, loose materials, dust, etc. Prepare frosty or icy surfaces by cleaning with alcohol. Natural shrinkage may give some joints a concave appearance. Multiple applications may be needed to fill the joint flat. If dirt or oils are present on the substrate, wash with any household cleaner, rinse to remove and allow to thoroughly dry. Remove any old caulk, especially silicone, or silicone residue. Use a silicone remover. Close ventilation intakes on roof until solvent dissipates (approx. 12 hours). Flammable during early cure (approx. 24-48 hrs.) Fully cured in 1-2 weeks. Paintable with latex paint/stain in 24 hours or oil-based paint/stain after one week. Common Substrates: Aluminum Brass Steel Copper Silver ABS Vinyl Lexan® Polycarbonate PVC Fiberglass Nylon Acrylic sheet/Plexiglass Concrete Stucco Mortar Brick Stone Terra Cotta © 2017. All Rights Reserved

Price: 82.49 USD

Location: Freehold, New Jersey

End Time: 2024-09-19T18:52:01.000Z

Shipping Cost: 0 USD