KleenStart Concentrated Wood Cleaner, Cleans Logs, Decks, Fences, Siding

Description: KleenStart puts the cleaning power of pure oxygen into your hands. As it dissolves, the crystals of KleenStart release the oxygen bound up inside them—giving you nature's own way of cleaning and brightening. Perfect for siding (both wood and vinyl), decks, roofs, tents, Log Homes, outdoor furniture—anything and everything that requires a good deep-down cleaning and brightening.Easy mix surface prep and cleaner for logs, decks, fences and moreOne quart makes 5-gallons and cleans about 750 square feet of surface areaDissolves easily in cold waterGentle to wood fibers (unlike harsh chlorine treatments)Biodegradable, non-toxicContains 100% percarbonate. No fillers added!Water thin solution- Flows on easily with a pump-up garden sprayerWet surface and allow the cleaner to work for approximately 10 minutes. Keep surface moist. If needed, scrub surface with a stiff brush.Loosens stains caused by mildew and mold for easy rinse away with water hose or pressure washerGently Brightens wood surfacesMix smaller quantities: 2/3 cup concentrate per gallon of waterEasy to rinse offRemoves mill COVERAGEHigher yield of product when mixed with hot water.1 Quart Cleans up to 1,200 square ft. when diluted1 Gallon Cleans up to 4,500 sq. ft. when diluted. Contains about 14.25 cups of granules. Mix ¼ -1/3 cup granules with 1 gallon hot or cold water. SURFACE PREPARATIONExteriorInitially wet down landscaping to dilute any overspray mist that might come in contact with plants. Wet down again at project completion to prevent spotting of foliage.InteriorOutlast KleenStart has a mild “bleaching” action which will change wood color slightly as it cleans. Test the effect of the solution in a small area.APPLICATION/MIXING METHODS Use hot water when possible, this yields more product and dissolves better.Do not mix more concentrate than can be used within 4 hours. Diluted product must be freshly mixed to be effective.Mix quart size jar into 5 gallons of fresh tap water or 8 gallons of hot water.For smaller batches mix ¼ to 1/3 cup granules per gallon water.KleenStart may not completely dissolve in water with certain mineral contentand cooler water temperatures. I.E. product mixed in very cold water will normally have a bit of residue remaining on the bottom of the bucket. If so, simply filter the liquid prior to pouring into a pump-up or other sprayer to prevent clogging.ExteriorBrush, pump-up garden sprayer or roll onto surface until wet.Allow liquid to sit for approximately 10 minutes to loosen soil and debris.Re-wet if it dries.Use nylon bristle brush to further loosen surface debris.Rinse clean with garden hose or pressure washer until water is clear.Re-apply a second treatment to initially unresponsive, heavily discolored areas.If wood is very gray from UV damage, consider X-180 Weathered Wood Restorer.InteriorPump up sprayerLightly scrub with nylon bristle brush if needed.Rinse with clean cloths/ towels dipped often in fresh clean water until rinse water from walls is clear.PRECAUTIONSFactory suggest testing Kleen Start first on cultured (manmade) stone.Contains Sodium Percarbonate. Do not allow powder to contact eyes. Use of goggles while pouring or mixing is highly recommended.Incidental skin contact should pose no health threat, but as with all chemicals, the use of rubber or neoprene gloves is recommended. STORAGE AND DISPOSALStore in cool, dry location.Can be harmful to fish and other wildlife. Use in such a way that runoff does not contact streams or open waterways.

Price: 29.95 USD

Location: Conehatta, Mississippi

End Time: 2024-10-08T15:36:13.000Z

Shipping Cost: 3 USD