Description: Grandfather Grandmother Clock Chain Grandfather Grandmother Clock Chain Grandfather grandmother clock chain by movement maker or links per foot LPF. Count the links on the old chain so it matches the LPF on the drop down menu. Mechanical Grandfather Clock Weights in a variety of options. Get any part of the weight or the weight complete for your clock, using the weight chart Full article » Please view these information tabs to learn about our Mechanical Grandfather Clock Weights Grandfather Clock Weights Description The Grandfather Clock Weights Description on this web page will cover what is meant by weights and their parts. Any part of the weight is available on its own. We also offer complete weights. If needing a complete clock weight, we need to determine what the appropriate weight is for the clock. This requires getting the information off of the back plate of the brass movement itself. This information will not be on any of the paperwork or clock case. Once the movement number is known, cross reference that with the weight chart. The diameter of the bob in another piece of information that needs to be known. The bob is the round disk at the bottom of the pendulum . The weight chart Before using the chart, you need to know who made the clock movement . This can be deceiving because the movement can have any name on it, but it may not be the true maker. For example, a Hermle unit may have the name Sligh, Ridgeway, Howard Miller and so on. The numbers on the movement is what will lead to getting the correct manufacturer of the movement not the names on the movement. The stamp with these numbers are right on the back plate. Use the movement identification page to find out who made it. Once the manufacturer is known and the starting numbers of the movement, use the chart to see the weight specifications for the Grandfather clock weights. Avoiding the weight chart There is also another way to go about this task, which may be easier. If the movement was made in Germany, post WW2, we can safely make the following assumptions. If the movement is square and chain driven, it will require 2@4.7 lbs and 1@6.6 lbs. These are available in either 47mm or 43mm diameters. If the pendulum bob is 8 1/2 inches or more, change that rule to 2@6.6 lbs and 1@4.7 in 47mm or 43mm. A movement that is rectangle in either chain or cable will use 2@7.7 and 1@9.9 LBS in 60mm diameter. This changes to 2@9.9 and 1@7.7 in 60mm diameter if the pendulum bob is 8 1/2 inches or wider. These specifications do not apply if the clock has 5 or 9 big tubes on the back. Also this rule is not for all Grandfather clock weights but the vast majority of the post WW2 German units. Close enough is good enough The weight specs list it as 4.7 or 6.6, however this is really being too picky. If getting it close to those numbers that is fine. In fact if ordering a 4.7 lb weight, it may come 5.3 or whatever, but that is just fine. There has to be some sort of reference for the factory to label the Grandfather clock weights so it is what it is. Just know if it is a pound over that is fine. If it's a little under, that is fine also. They do not have to be exact. Often wrong from the start In fact, there is a lot of clocks in the world sold new with the wrong Clock Weights on them from the start. Clockworks will do a repair and they will say the clock ran for 30 years straight and come to find out they had Grandfather clock weights that were a pound or two too heavy. If the weights are a little too heavy it is fine. A lighter weight may or may not be fine because it may not trigger the movement to work properly. Grandfather Clock Weights Description - Conclusion Grandfather clock Weights are not cheap mainly because they are so heavy to keep, ship, store, move from here to there. Sure one weight set of three is less than 30 lbs but that adds up quickly in a stack of weight sets. With that said, we don't want to ship these back and forth. It is best to get the right weights the first time. To return these is not an inexpensive or easy task. For example, suppose we charge $30 to ship these and for some reason they are wrong. Then it is $30 to get them back to us and another $30 to send out a new set. In addition, UPS charges a fee to send a call tag for them to come back. That is $110 to UPS for no reason. So if there are questions, please ask. The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022 Grandfather Clock Weights Stuck The Grandfather clock weights can get stuck in the high position if over wound. Some larger clocks have over wind protection to prevent this. The grandmother and grandfather chain drive units often do not have this feature. When winding the weights up make sure the top of the weight can be seen when done. Never go to the point where the top of the shiny weight cover can't be seen. Chime weight stuck The chime weight is on the right as you face the clock and has the heaviest weight . Using cloth gloves, or at least a cloth of some kind, pull down on the weight some. This is the same as making the weight weigh more. At the same time, turn the minute hand past the quarter hour to see if it will engage the chime. When you advance the time and make it chime, the weight will slowly come down. This will hopefully be enough to activate and run the chime on its own. Time weight stuck The time weight is the center weight which can be light or heavy depending on bob size. This is the hardest weight to deal with out of the three. Try pulling down some while swinging the pendulum . See if it starts running on its own when letting go. If this does not work, take off the pendulum. All it will have is the pendulum leader hanging on the back of the movement. This will make it tick tock faster than if the pendulum was on. The leader will tick tock faster as you pull down some on the weight. The weight will then come down enough to run the clock. If all else fails, and it’s a chain driven clock, you would need to cut the chain in half, or break a link, to take the movement out of the clock. With the movement out of the clock you can fix it. Strike weight stuck The strike weight is on the left as you face the clock and has the lightest weight. Only after the chime weight is operating correctly can you work on the strike weight. If the clock does not run through the chime sequence it will not get to where it strikes out the hours. With some cloth gloves on, or at least a cloth of some kind, pull down on the weight some. Again, this is the same as making the weight weigh more. Doing this will make the clock strike. Advance the minute hand and let it chime each quarter until it plays the top of the hour song. Then pull a little on the weight when it is going to strike out the hours. Keep advancing the time with the minute hand, as to make it chime and strike. Then slowly the weight will come down enough to be able to activate and run the strike on its own. The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022 If the pendulum bob is 8.5, or larger, the time weight should be the same as the chime weight instead. (Tubular Bell movements are an exception) If the pendulum bob is 8.5, or larger, the time weight should be the same as the chime weight instead. (Tubular Bell movements are an exception) If the pendulum bob is 8.5, or larger, the time weight should be the same as the chime weight instead. (Tubular Bell movements are an exception) Changing a Clock Cable Changing a clock cable requires the movement to be out of the clock case. These instructions refer to post WW2 modern grandfather units of German origin, however all makes have a similar method. Swapping the cable is easy. There is a big hole and a little hole on the cable mount. The cable end fits into the big hole, then slides over to seat into the little hole. When the lock is set, it seats in securely. It's the same basic theme on both ends of the cable , meaning, one slot being in the cable drum itself and the other on the movement. The cable drum side of the cable To remove, lift the cable up from the oblong hole on the drum and slide it over to the big side. The cables have ends made of brass on them. These get slid over from the small side of the slot on the cable drum to the larger slot. It will release so as to remove it from the clock movement. The other end of the cable The movement itself would normally have the plates set for the cable ends. The cables have round brass ends on them and these lock into a plate on the movement. This plate will have a small hole leading to a big hole. To remove the cable it requires only lifting the end and moving over to the big hole and out. The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022 Grandfather Grandmother Clock Chain Replace your Grandfather grandmother clock chain by the movement maker or by counting the links per foot (LPF). All you have to do is measure out a 12 inch section of chain and count how many links are in that old chain, then match it to the LPF on the drop down menu. As the chain advances in age, the links may separate a bit so it is not always easy to get the correct number when counting. Do your best to get the one that is the closest to the number of links that you were able to count. All Hermle chain driven units take a 46.5 LPF chain. Cuckoo clock chains are sold in a different section on Clockworks . Clock Chain Installation Installing the clock chain is simple. One end of the chain has a hook and the other end has a tab. Loop the chain over the ratchet wheel so the hook end is on the side of the ratchet that will not come down if you pull it. The loop end will be on the other side of the chain. The weight is meant to be up in the air when you pull the chain and not be able to come crashing down when it is hung. SizePrice45LPF 1.6mm 60ins =Kieninger SK16.5038LPF 2.0mm 72in =Kieninger16.5040LPF 1.8mm 60in =UW0327.5043LPF 1.6mm 72in16.5046.5LPF 1.7mm 60in =Hermle and Urgos16.5046.5LPF 1.7mm 60in Dark =Hermle and Urgos22.0052LPF 1.05mm 70in Brass16.5072LPF 0.7mm 70in Brass6.60 Shipping Shipping cost:Clockworks products are shipped out within a day or two of purchase. Our team works hard shipping M-F. Delivery time:Handling time is 1-2 days then once your product ships it should take at the most 5 business days to get to you. Payment We accept the following payment methods: Paypal Debit Credit Please contact us if you have any questions.
Price: 16.5 USD
Location: Huntington, Massachusetts
End Time: 2023-12-19T19:29:26.000Z
Shipping Cost: 6 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: Clockworks
Type: Clock Parts
Color: Black
Model: Chain
Available Variations
Color: 45LPF 1.6mm 60ins =Kieninger SK
Price: 16.5 USD
Available Quantity: 15
Quantity Sold: 11
Color: 38LPF 2.0mm 72in =Kieninger
Price: 16.5 USD
Available Quantity: 3
Quantity Sold: 3
Color: 40LPF 1.8mm 60in =UW03
Price: 27.5 USD
Available Quantity: 5
Quantity Sold: 5
Color: 46.5LPF 1.7mm 60in =Hermle and Urgos
Price: 16.5 USD
Available Quantity: 71
Quantity Sold: 18
Color: 46.5LPF 1.7mm 60in Dark =Hermle and Urgos
Price: 22 USD
Available Quantity: 9
Quantity Sold: 2
Color: 52LPF 1.05mm 70in Brass
Price: 16.5 USD
Available Quantity: 5
Quantity Sold: 2
Color: 72LPF 0.7mm 70in Brass
Price: 6.6 USD
Available Quantity: 1
Quantity Sold: 1
Color: 43LPF 1.6mm 72in
Price: 16.5 USD
Available Quantity: 0
Quantity Sold: 0
